Starting with a rugged trailer
The floor and subfloor complete.
Glueing in spacer blocks. The bolts will go thru these blocks when the floor is bolted down to the trailer.
Gluing down the subfloor.
Cleaning up.
Gluing the plywood down to the subfloor.
The floor is ready to be glued down.
Glue and screws will keep it together.
I use Gorilla glue on the subfloor.
Putting down a bead of glue.
First piece down.
Lining up the subfloor with the chassis.
The finished floor. Once the roofing tar is dry we'll flip it over.
Putting on the roofing tar.
Blowing off all the dust.
This is what we use to protect the floor.
The wheel wells are done
The second wall goes up.
Testing for perpendicularity.
The first wall goes up.
33-64 (of 243 found)
