The counter is done.

Gluing the oak to the sides.

Lots of glue.

Finishing the floor in the galley.

How deep shall we make the counter?

Checking the upper cabinet size.

Priming the floor.

Sealing off the a/c

trimming the oak.

Closing up the bulkhead wall.

A good support for that heavy air conditioner.

Cutting a hole in the side for the a/c venting.

The circular saw in action.

Another view of the a/c support.

The intake and exhaust is divided by a board.

A size comparison.

The final section of headliner goes in.

Making sure the fridge fits.

Cutting a template for the hatch.

This will work nicely.

Two templates cut out of scrap wood.

Putting poly on the galley surfaces

Checking out the comfort level. Ahhhhhhhhhh!

Attaching the upper cabinet

The cleat on the back wall holds up the shelf.

Stapling in the head liner.

Putting a side on the upper cabinet.

The cabinet had to be modified.

The fridge fits.

Just barely though...

Gluing down the counter

Making sure the face frame is perpendicular to the floor.